1080P Intelligent Pedestrian & Vehicle Detecting and Warning Camera for Vehicle Use
ADA38
Adapting deep learning technology, STONKAM 1080P Intelligent Pedestrian & Vehicle Detecting and Warning Camera can intelligently detect pedestrians and vehicles at the front, side and rear of the vehicle in real time. Working with STONKAM HD monitor, it can also provide real-time visual and audio alarm to remind drivers of potential risks and hitting pedestrians or vehicles. Moreover, the camera has wide horizontal viewing angle of 170°, so when it is installed on the side ahead, it can help drivers have a better view, avoiding accidents caused by blind spots. Thus, this camera is an essential driving assistant device for large-size vehicles like trucks, buses, construction machines, etc.
Inquire Now
Effective Pixels |
1920(H)x1080(V) |
Pixel pitch |
2.8μmx2.8μm |
Frame Rate |
25/30 |
Scanning System |
Progressive Scanning |
Sync. System |
Internal |
Resolution |
1080p |
Video output |
1.0Vp-p,75Ohm |
Gamma Consumption |
0.45 |
Signal to Noise Ratio |
38dB |
White Balance |
Auto |
Exposure |
Auto |
Supply Voltage |
DC10~32V |
Working Temperature |
–20℃~70℃,RH95%MAX. |
Storage Temperature |
–30℃~80℃,RH95%MAX. |
Waterproof Rating |
IP69K |
Viewing Angle after correction |
Vertical side view: 6mm/ 52°
|
Audio |
YES |
Minimum Illumination |
0.01Lux |
Detection Distance |
Vertical side view:0.5~20m
|
Image mode |
Mirror/Normal image switchable |
Why do we need to install STONKAM 1080P Intelligent Pedestrian & Vehicle Detecting and Warning Camera for Vehicle Use?
|
The lens angle can be flexibly adjusted according to the site and installation height for better images.
When the camera is installed on the two sides, it’s recommended to be at 2.5m-3.5m height for downward view, and 1.0m-1.6m for forward side view.
When the camera is installed on rear part, it’s recommended to be at 2.5m-3.5m height for downward view or 1.0m-1.6m for horizontal view.